<menu id="myki2"></menu>
<nav id="myki2"></nav>
  • <nav id="myki2"></nav>
    <nav id="myki2"><optgroup id="myki2"></optgroup></nav>
  • 網站公告:

    新聞中心

    濟南精拓流體設備有限公司

    電話:0531-69951198

    郵箱:jingtuolt@163.com

    傳真:0531-69951198

    地址:濟南市歷城區西周南路9號

    網址:http://www.massonisweb.com

    網站公告

    當前位置:首頁 - 網站公告 - 氬氣增壓泵的適應參數及范

    氬氣增壓泵的適應參數及范圍介紹

    發布時間:2019-04-04 13:22:40   發布人:http://www.massonisweb.com
    氬氣增壓泵-氣體增壓泵為應用于末端壓力缺乏的狀況,只需求一個普通空氣增壓器即可完成將空氣增壓到需求的壓力。合適單氣源增壓。主要應用在氣動行業、機床設備行業、石油化工行業、航空航天行業、汽車制造業、造船業、食操行業、壓力監測行業等范疇。適用于緊縮空氣、氮氣、氦氣、氬氣、氧氣、氫氣、甲烷、自然氣等大局部氣體增壓以及閥門、管件,冷凝管、空調盤管的氣密性測試。
    Argon Booster Pump - Gas Booster Pump is used in the condition of lack of end pressure. It only needs a common air booster to complete the pressurization of air to the required pressure. Suitable single gas source pressurization. It is mainly used in the fields of pneumatic industry, machine tool equipment industry, petrochemical industry, aerospace industry, automobile manufacturing industry, shipbuilding industry, food and gymnastics industry, pressure monitoring industry and so on. Applicable to compress air, nitrogen, helium, argon, oxygen, hydrogen, methane, natural gas and other local gas pressurization and valve, pipe fittings, condensation pipe, air conditioning coil air tightness test.
    二、氬氣增壓泵-氣體增壓泵性能參數
    2. Performance parameters of argon booster pump-gas booster pump
    工作介質:水、液壓油以及大局部化學腐蝕性液體
    Working medium: water, hydraulic oil and most chemical corrosive liquids
    輸出壓力可達140Mpa,增壓比有2倍增壓,5倍增壓*到200倍。
    The output pressure can reach 140 Mpa, the boost ratio is 2 times, the boost ratio is 5 times * 200 times.
    氣體輸入口壓力范圍為
    Gas Input Pressure Range
    驅動氣壓≤
    Driving Pressure <
    氣體增壓泵
    流量:
    Flow rate:
    )工作原理:緊縮空氣驅動大面積端活塞,小面積端得到高壓氣體輸出。
    ) Working Principle: Compact air drives large area end piston, small area end gets high pressure gas output.
    三、氬氣增壓泵-氣體增壓泵的特性
    Characteristic of Argon Booster Pump-Gas Booster Pump
    (1)適用范圍廣。工業范疇用于機床卡盤的卡緊,蓄能器充氣,高壓瓶充氣,降低壓氣體轉換成高壓氣體等。但凡氣源壓力不夠高,無論是機械或測試安裝,均可采用思明特氣體增壓器。
    (1) Wide scope of application. Industrial applications include clamping of machine tool chucks, inflating accumulators, inflating high-pressure bottles, converting low-pressure gases into high-pressure gases, etc. However, whenever the pressure of the gas source is not high enough, whether mechanical or test installation, Smitter gas supercharger can be used.
    (2)多種氣源驅動:緊縮空氣、氮氣等均可作為驅動氣源
    (2) Various kinds of gas source driving: compressed air, nitrogen and so on can be used as driving gas source.
    (3)應用靈敏:多種型號可選,選用不同型號的泵,壓力區域也不同
    (3) Application sensitivity: Various types of pumps can be selected, different types of pumps can be selected, and the pressure area is also different.
    (4)整臺泵采用鋁合金及不銹鋼制造,運用壽命長
    (4) The whole pump is made of aluminium alloy and stainless steel with long service life.
    (5)自動保壓:無論何種緣由形成保壓回路降落,將自動補充走漏壓力,堅持回路壓力恒定。
    (5) Automatic Pressure Maintenance: No matter what reason the pressure retaining circuit falls, it will automatically supplement the leakage pressure and insist that the pressure of the circuit is constant.
    (6)可長時間保壓不耗費能量,保壓時介質不會產生過熱現象,延長介質運用壽命。
    (6) Pressure can be maintained for a long time without consuming energy. When pressure is maintained, the medium will not overheat and prolong the service life of the medium.
    本文由氣體增壓泵提供技術支持,更多的詳細精彩內容請點擊我們的官方網站http://www.massonisweb.com ,我們將會全心全意為您提供滿意的服務。
    This article is supported by gas booster pump. For more details, please click on our official website http://www.massonisweb.com. We will provide you with satisfactory service wholeheartedly.

    13188935873

    qq

    甘肃11选5