<menu id="myki2"></menu>
<nav id="myki2"></nav>
  • <nav id="myki2"></nav>
    <nav id="myki2"><optgroup id="myki2"></optgroup></nav>
  • 網站公告:

    新聞中心

    濟南精拓流體設備有限公司

    電話:0531-69951198

    郵箱:jingtuolt@163.com

    傳真:0531-69951198

    地址:濟南市歷城區西周南路9號

    網址:http://www.massonisweb.com

    企業動態

    當前位置:首頁 - 新聞中心 - 企業動態 - 氣動增壓泵的可控制調節要

    氣動增壓泵的可控制調節要注意什么?

    發布時間:2020-10-15 13:17:56   發布人:http://www.massonisweb.com
    性價比高——具有輸出性能高而成本低的特性。
    High cost performance - it has the characteristics of high output performance and low cost.
    維護簡單——氣動增壓泵的零件及密封少,維護簡單且成本低。
    Simple maintenance - pneumatic booster pump has less parts and seals, simple maintenance and low cost.
    可調性強——壓力和流量都由驅動氣體的壓力調節閥準確地調節。
    Strong adjustability - the pressure and flow are accurately regulated by the pressure regulating valve of the driving gas.
    工作原理——氣動增壓泵利用大面積活塞端低壓氣體驅動而產生小面積活塞端的高壓流體。
    Working principle: pneumatic booster pump uses low pressure gas at large area piston end to generate high pressure fluid in small area piston end.
    氣體增壓泵
    應用靈活——從簡單的手工操作到全自動化操作,氣動增壓泵適用于各個應用領域。在同一系列里的大多數型號的泵的空氣馬達是可互換的。自動重啟——工作時,氣動液體增壓泵迅速往復工作,隨著輸出壓力接近設定壓力值時泵的往復運動速度減慢直至停止。并保持這個壓力,此時能量消耗很小,無熱量產生,無零件運動。當壓力平衡打破后,氣動泵自動開始工作到下一個平衡。適用范圍廣——氣動增壓泵可以用于油類或水等絕大部份液體。輸出壓力高——氣動增壓泵的工作壓力可達到73,000psi(503Mpa)甚至可達700Mpa。輸出流量大——氣動增壓泵只需100psi(0.69Mpa)壓縮空氣驅動就可獲得較大的輸出流量。根據不同工作要求,氣動增壓泵有多種系列產品可供用戶選擇。
    Flexible application - from simple manual operation to fully automatic operation, pneumatic booster pump is suitable for various application fields. The air motors of most pump models in the same series are interchangeable. Automatic restart: when working, the pneumatic liquid booster pump quickly reciprocates. When the output pressure is close to the set pressure value, the reciprocating speed of the pump slows down until it stops. And maintain this pressure, at this time the energy consumption is very small, no heat generation, no part movement. When the pressure balance is broken, the pneumatic pump automatically starts to work to the next balance. Wide range of application - pneumatic booster pump can be used for most liquids such as oil or water. High output pressure - the maximum working pressure of pneumatic booster pump can reach 73000psi (503mpa) or even 700MPa. Large output flow: the pneumatic booster pump only needs 100psi (0.69mpa) compressed air drive to obtain a larger output flow. According to different working requirements, pneumatic booster pump has a variety of products for users to choose.
    上面的內容就是今天小編給大家介紹的內容了,我們真誠為您提供氣體增壓泵服務,您的滿意就是我們的責任,歡迎在網站下方留言:http://www.jnyhrs.com
    The above content is the content introduced to you today. We sincerely provide you with laboratory decoration service. Your satisfaction is our responsibility. Welcome to leave a message at the bottom of the website: http://www.jnyhrs.com

    13188935873

    qq

    甘肃11选5