1、潤滑油
1. Lubricating oil
合理選用潤滑油種類和牌號,嚴格控制潤滑油的用量,加油量不要過多或太少,應遵照設備技術文件執行。
The type and brand of lubricating oil shall be selected reasonably, the amount of lubricating oil shall be strictly controlled, the amount of oil shall not be too much or too little, and the technical documents of the equipment shall be followed.
2、管道振動的預防措施
2. Preventive measures for pipeline vibration
設計氣壓管道時,應盡量減少彎管、閥門和異徑管,或者使管彎曲的曲率半徑大一此,以減小激振力。
In order to reduce the exciting force, the bend, valve and reducer should be reduced as much as possible, or the curvature radius of the pipe should be larger.
3、對操作人員的要求

3. Requirements for operators
嚴格執行各項規章制度,精心操作,認真填寫操作運行記錄或生產上藝記錄,確保生產安全運行;發現氣動增壓泵/氣體動力單元有異常現象危機安全時,應采取緊急停機措施并及時向上級報告;對任何有害設備的違章指揮,應拒絕執行;努力學習業務知識,不斷提高操作技能。
Strictly implement the rules and regulations, carefully operate, carefully fill in the operation record or production process record to ensure the safe operation of production; in case of any abnormal phenomenon of pneumatic booster pump / gas power unit, emergency shutdown measures shall be taken and timely report to the superior; any illegal command of harmful equipment shall be refused; Strive to learn business knowledge, and constantly improve operational skills.
4、儲氣罐殼體缺陷的預防措施
4. Preventive measures for defects of gas tank shell
儲氣罐是壓力容器之一。壓力容器屬于特種設備,國家質量技術監督局頒發《壓力容器安全技術檢察規程》對壓力容器的設計、制造、安裝、質量檢驗、運行、監測和維護管理均有嚴格的規定,必須嚴格遵守。任何一個環節如有疏忽,都有可能發生嚴重的爆炸事故。
The gas tank is one of the pressure vessels. The pressure vessel belongs to special equipment. The State Bureau of quality and technical supervision has issued the "inspection regulation for safety technology of pressure vessel", which has strict regulations on the design, manufacture, installation, quality inspection, operation, monitoring and maintenance management of pressure vessels, which must be strictly observed. If any link is negligent, serious explosion accident may occur.
5、儲氣罐超壓的預防措施
5. Preventive measures for overpressure of gas tank
設立儲氣罐內壓力保護裝置,一旦超壓能自動停止工作。壓力調節器、安全閥必須經過正確調試,保證靈活可靠。操作人員必須熟悉并應遵守空壓機和壓力容器的安全操作規程。
Set up pressure protection device in the air tank, once overpressure can automatically stop working. The pressure regulator and safety valve must be correctly debugged to ensure flexibility and reliability. Operators must be familiar with and abide by the safety operation rules of air compressor and pressure vessel.
This article is organized and released by the gas-liquid booster pump. Do you have any understanding of these contents? For more information, please click: http://www.massonisweb.com We'll have a lot more to see.